ENGINE VALVE SET - REV
Engine valve or engine valve is only available on 4 stroke motors, functions as an open and close door that determines the occurrence of the suction step, compression stroke, power stroke and exhaust stroke in the 4 stroke engine cycle. This valve mechanism becomes an integral part of the camshaft mechanism, the valve springs and the piston movement.
Features
• Engine valves or valves designed to improve 4 stroke engine performance.
• Lighter weight, which reduces the mechanical load on the valve mechanism, thereby increasing engine performance.
• With a special coating on the valve stem surface to reduce frictional loads on the valve stem for longer service life.
• The weight of each valve is lighter but sturdier than the OEM valve.
• The surface of the valve stem uses a special coating to minimize friction on the valve stem.
• Longer lifetime.
Specification
TAKE NOTE
VALVES ARE CRITICAL COMPONENTS OF THE ENGINE AND INSTALLATION SHOULD BE PERFROMED BY AN EXPERIENCED TECHNICIAN.
INSTALL CORRECT VALVE AND VALVE SPRINGS DESIGNED TO WORK TOGETHER, PERFORMANCE CAMSHAFTS WITH LONGER DURATION AND HIGHER LIFTS SHOULD ALSO BE MATCHED TO AVOID EXCESSIVE WEAR OR DAMAGE. BEFORE INSTALLATION, VALVE STEMS SHOULD BE LUBRICATED WITH ENGINE OIL THEN INSERTED INTO THE VALVE GUIDES, TO AVOID DAMAGE TO THE VALVE SEAL, TURN SLOWLY WHEN INSERTING
WARNING!
- VALVE SEATS ARE TO BE MACHINED TO SPECIFICATIONS TO ENSURE 100% VALVE TO SEAT CONTACT AT 45 DEGREES
- CONTACT AREA SHOULD BE AT LEAST 1MM AND VALVE ALIGNMENT CHECKED DURING INSTALLATION.
- MACHINE THE VALVE SEAT IF THE VALVE CONTACTS SEAT UNEVENLY.
- VALVE SEAT MATERIAL WILL GET THINNER AFTER REPEATED MACHINING WHICH WILL REDUCE THE COOLING AND SHOULD BE REPLACED ACCORDINGLY.
Motorcycle Models
Features
• Engine valves or valves designed to improve 4 stroke engine performance.
• Lighter weight, which reduces the mechanical load on the valve mechanism, thereby increasing engine performance.
• With a special coating on the valve stem surface to reduce frictional loads on the valve stem for longer service life.
• The weight of each valve is lighter but sturdier than the OEM valve.
• The surface of the valve stem uses a special coating to minimize friction on the valve stem.
• Longer lifetime.
Specifications
TAKE NOTE
VALVES ARE CRITICAL COMPONENTS OF THE ENGINE AND INSTALLATION SHOULD BE PERFROMED BY AN EXPERIENCED TECHNICIAN.
INSTALL CORRECT VALVE AND VALVE SPRINGS DESIGNED TO WORK TOGETHER, PERFORMANCE CAMSHAFTS WITH LONGER DURATION AND HIGHER LIFTS SHOULD ALSO BE MATCHED TO AVOID EXCESSIVE WEAR OR DAMAGE. BEFORE INSTALLATION, VALVE STEMS SHOULD BE LUBRICATED WITH ENGINE OIL THEN INSERTED INTO THE VALVE GUIDES, TO AVOID DAMAGE TO THE VALVE SEAL, TURN SLOWLY WHEN INSERTING
WARNING!
- VALVE SEATS ARE TO BE MACHINED TO SPECIFICATIONS TO ENSURE 100% VALVE TO SEAT CONTACT AT 45 DEGREES
- CONTACT AREA SHOULD BE AT LEAST 1MM AND VALVE ALIGNMENT CHECKED DURING INSTALLATION.
- MACHINE THE VALVE SEAT IF THE VALVE CONTACTS SEAT UNEVENLY.
- VALVE SEAT MATERIAL WILL GET THINNER AFTER REPEATED MACHINING WHICH WILL REDUCE THE COOLING AND SHOULD BE REPLACED ACCORDINGLY.
Motorcycle Models